Once the can has dried, you will want to remove it’s pull tab.
啤酒罐干了之后,去掉拉环。
Only perform this next step if you have not been drinking. Using the utility knife, saw off the bottom of the can. Chances are your can will not have a red dotted line. If you see one, put down the knife…you’ve had too much beer.
用美工刀切掉开口端,剪开罐身,再将底端切割成部分相连的形状。
It’s the home stretch! You just need to attach your modded beer can to the wifi router. Hopefully no other parts of the can have actually grown back. You now have beer-fi!
现在是最后一步了。只要把你的啤酒罐模型连接到路由器上—如果没有什么要修改的,你就拥有了自己的啤酒罐路由器
【探索发现 wifi 啤酒罐也可以有大用处】相关文章:
★ 塑料污染无处不在
最新
2020-09-15
2020-09-15
2020-09-15
2020-09-15
2020-09-15
2020-09-15